MM工质热分解及其对ORC系统影响的研究

热稳定性是限制有机工质在有机朗肯循环(Organic Rankine Cycle,ORC)使用的重要因素。硅氧烷类工质具有低毒环保、化学性质稳定等优点,适用于150~350℃热源。本文研究了六甲基二硅氧烷(MM)工质热分解的特点及其对ORC系统的影响,结果表明,MM的热分解产物为硅氧烷类化合物及微量气态小分子碳氢化合物;热分解将导致系统性能下降,分解量足够大时,会出现蒸发器换热不充分导致膨胀机入口处工质干度低于1从而影响机组安全的问题。     

Seed priming with cold plasma improved seedling performance,secondary metabolism,and expression of deacetylvindoline O-acetyltransferase gene in Catharanthus roseus

The plasma-primed seeds of Catharanthus roseus were cultured in a hormone-free culture medium under sterile conditions. Plasma of 30 or 60 s improved root length (mean = 41.4%) and biomass (mean = 47%), whereas plasma of 90 s delayed plant growth. The plasma treatments enhanced concentrations of photosynthetic pigments and soluble phenols. Plasma of 90 s increased the proline level. With a similar trend, plasma priming induced activities of phenylalanine ammonia-lyase, catalase (about twofold) and peroxidase (31%) enzymes. Plasma also upregulated the expressions of deacetylvindoline O-acetyltransferase gene by an average of 7.8 times. Similarly, the plasma-treated seedlings contained higher concentrations of alkaloids (mean = 72%). Here, molecular evidence is provided on the plasma-associated modifications in secondary metabolism.     

基于数字全息的热透镜效应测量

提出一种数字全息定量测量半导体激光二极管侧面泵浦Nd∶YAG晶体热透镜效应的方法。CCD采集Nd∶YAG晶体在不同泵浦电流下的数字全息图,通过数值重建得到热透镜效应引起的相位分布及其变化过程。再由相位分布计算得到对应的热透镜焦距。实验结果表明,利用数字全息技术可以准确和有效测量热透镜效应及热透镜焦距。     

Stabilization of polystyrene by styrylquinoline containing methacrylates

Abstract

The thermostability of polysterene with/without new styrylquinoline containing methacrylic fragments has been described in the present work. Polystyrene and copolymers based on styrene and new methacrylic styrylquinoline containing monomers were synthesized by free radical thermoinitiated polymerization in the presence of 2,2′-azobisisobutyronitrile (1?wt%) as initiator at inert atmosphere. The impact of 2-[2-(4-methoxyphenyl)ethenyl]quinolin-8-yl 2-methylpropyl-2-enoate (М1), 2-(2-phenylethenyl)quinolin-8-yl 2-methylpropyl-2-enoate (М2), 2-[2-(4-nitrophenyl)ethenyl]quinolin-8-yl 2-methylpropyl-2-enoate (М3) on thermal stability of polystyrene was investigated. The thermostability of polystyrene and copolymers ST:M1, ST:M2, ST:M3 were studied by dynamic thermograviametric analysis. It was shown that destruction of polystyrene with corresponding units M1-M2 starts at 41–42°С higher, than reference polystyrene.     

Comparison of two cold atmospheric pressure plasma jet configurations in argon

The present study compares the operation of two cold atmospheric plasma jet (CAPJ) configurations: needle-to-cylinder electrode configuration (CAPJ I) and single high-voltage cylinder electrode around the quartz tube (CAPJ II). The CAPJs were operated in argon flowing through a quartz capillary with 0.5-mm inner diameter into the ambient air, and the plasma was generated by sinusoidal kHz frequency AC power supplies. The main emphasis of the study was on the mechanism of the initiation of ionization waves for these two configurations. For both CAPJs, there appeared several ionization waves during one half-period of the applied voltage waveform, and the number of ionization waves increased at higher voltage amplitudes. However, we discovered marked differences in the initiation of the ionization waves for two different CAPJ configuration. The applied voltage controlled the initiation of consecutive ionization waves, which propagated from the grounded electrode towards the tube orifice in CAPJ I. In the case of CAPJ II, certain time had to pass for the initiation of a new ionization wave, and subsequent ionization waves within the same half-period started at the tube orifice. In addition to the differences in the initiation of the ionization waves, we observed that the CAPJ I was ignited and sustained at lower voltages, while CAPJ II produced a longer plasma jet. The observed advantages and deficiencies of investigated CAPJ configurations point out their potential in different applications.     

915 nm宽条形半导体激光器输出特性

为了研究温升对915 nm宽条形应变量子阱半导体激光器输出特性的影响,搭建了基于半导体制冷片(TEC)的双向温控平台对其进行了测试。首先,改变激光器的外表面温度,测量其在不同注入电流时的光功率和波长,并利用CCD相机测量其慢轴发散角。然后,利用计算机仿真软件对激光器的工作状态进行稳态模拟,从而获得了其对应的热分布情况,通过将模拟得到的数据与实验测量的结果进行比较,获得了两者趋于一致的结论:当热功率从2.1 W升高至20.0 W时,慢轴发散角从2.6°增大至5.0°,同时波长发生红移,热透镜焦距减小;激光器波长随温度变化关系的系数约为0.4 nm/℃,器件热阻为1.5 K/W。因此,为了同时获得高的输出功率和稳定的输出波长,有必要将激光器外表面温度精确控制在某一数值,否则波长将会发生漂移;此外,在设计制作高功率半导体激光器时,通过适当增加条宽并采用散热良好的封装结构,可以减小对慢轴发散角的影响。     

绝缘环打火研究

绝缘问题是高电压、高场强器件和设备中不可回避的问题,是决定器件、设备运行参数和稳定性的重要因素。针对一台直线感应加速器调试中出现的加速腔绝缘环在带束负载情况下的真空沿面闪络现象,进行了分析和研究。分析表明,在排除设计、材料、加工、洁净和真空度等常规异常因素后,导致绝缘环真空沿面闪络的可能因素是电子在绝缘环表面的吸附和累积,绝缘环上累积的电子来源和加速器中加速、传输的电子束的丢失有关。从加速腔工作状态出发,分析绝缘环表面积累电荷和丢失电子束的相关途径,进而提出相应的技术措施,以提高加速腔运行稳定性。     

铅基堆超临界CO2复合循环发电系统热力学分析

本文对比了再压缩超临界CO2 (S-CO2)循环、蒸汽朗肯循环、He布雷顿循环分别应用于铅基堆的最优热学性能,明确了S-CO2循环与铅基堆结合较传统循环的热力学优势。为进一步提高再压缩S-CO2循环的效率,以跨临界CO2 (T-CO2)循环为底循环构建了再压缩S-CO2/T-CO2复合循环,探讨了不同顶循环透平入口温度、压力和压缩机入口温度条件下系统性能的变化规律,对比了S-CO2/T-CO2复合循环和S-CO2循环的热学性能。结果表明:铅基堆再压缩S-CO2循环发电系统较传统循环形式具有更高的热效率;构建的S-CO2/T-CO2复合循环能够有效提高S-CO2循环的效率,在所研究参数范围内,S-CO2/T-CO2复合循环的热效率和效率比S-CO2循环分别最大可提高约4.8%和8.3%;再压缩S-CO2循环和S-CO2/T-CO2复合循环热学性能随顶循环关键参数变化规律具有一致性。     

Implementation of a separate fluid-neutral energy equation in SOLPS-ITER and its impact on the validity range of advanced fluid-neutral models

In plasma edge transport codes for nuclear fusion devices, fluid-neutral models offer an interesting alternative to the currently used kinetic Monte Carlo simulations, especially for cases of high ion-neutral collisionality. In this paper, we elaborate a separate neutral energy equation in the state-of-the-art SOLPS-ITER code suite, which previously assumed perfect ion-neutral temperature equilibration. Furthermore, we study the coupled plasma-neutral solutions for a range of divertor operating regimes, proving the validity of these fluid-neutral models for high-recycling and detached regimes.     

消毒灭菌的电离辐射与电磁辐射等物理技术比较分析北大核心CSCD

消毒灭菌技术广泛应用于食品工业、医疗领域、水处理等方面。相对于传统化学和热效应的消毒灭菌方法,γ射线、X射线、电子束、微波、低温等离子体、紫外线、高压脉冲电场等物理手段具有不污染环境、消毒灭菌温度低、没有化学残留物等优点而日益受到重视。但这些物理技术手段各有不同,本文首先介绍了γ射线、X射线、电子束、微波、低温等离子体、紫外线、高压脉冲电场等消毒灭菌的技术原理,然后对比了各自优缺点和应用领域。每种方法都有优势和不足,应针对不同的消毒灭菌对象而选择不同的方式。最后,展望了消毒灭菌的发展方向,提出了消毒灭菌在家庭日常消毒、医疗垃圾处理、有人状态下的室内空气消毒等方面的迫切需求。